|
Features:
(1) At low speeds the torque increases and the efficiency is enhanced
The KIMPO-DISCO stepless gearbox, with an input capacity of 0.18~22kw, can tolerate any special environment such as overload, pounding load and reactionary load, for the transmission of the torque is done by several sets of inclined planetary pieces. At low speeds because the track of a planetary piece is enlarged and the arm is increased, the torque increases and the efficiency is enhanced.
(2) All-sealed mechanical speed-change
The KIMPO-DISCO stepless gearbox changes its speeds by mechanical means and is sealed fully within the frame in such that in a special place such as one subject to explosion, flammability, dust, acidity or alkalinity or humidity, if only the motor is chosen appropriately it can adapt to the environment without any danger and the use life is particularly long.
(3) Stability: the fluctuation of the speeds is within 0.01%
Another feature of the mechanical speed-change is speed stability and low variation. Any assembly of a planetary piece is equipped with a pressure-adjustment device so that the speed stability will not lose accuracy on account of an increase in environmental temperatures or of long use.
(4) Small size, low weight and excellent interface features
KIMPO-DISCO can provide 1 HP from a body of 152mm long; small size and low weight. Moreover, vertical, horizontal or twin-axis type can fit into the integral moving system. It can also apply to a single motor to drive for reducing cost and failure, enhancing the features of the integral moving system. As a result, the application of twin-axis type is a must.
(5) Easy operation for speed-change
By using the operational wheel the speed change is simple and easy. In operation, whenever in load status or not, the speed-change can be done fast and precisely and each type of remote control can be installed additionally together with P.L.D. for automatic control.
(6) A wide range of applications
Any speeds can be specified and any angle can be installed without being limited by the speed-change of the input axis. And it can also go along with the use of each type of motor and decelerator. |
